William Kenyon supplies a full array of mounting hardware to position and angle sheaves into virtually any orientation. Combinations of Mounting Blocks, Shafts and T-Arms allow for infinite, three-axis sheave adjustment to ensure proper alignment and prolonged rope life. Stock sizes range from diameters of 35mm to 50mm and in a variety of lengths. Stainless Steel components are available upon request for wet press, size press and coater applications.
All T-Arms are ground steel, for a smooth fit, and have a full strength penetration weld for maximum strength. A pilot hole is predrilled in the head for ease of pinning. A black oxide coating is applied to inhibit rust.
Stacks Image 4781
Universal Mounting Block
Universal Mounting Blocks are fabricated of steel and finished with a black oxide coating to inhibit rust. Mounting holes are cross-drilled to allow either parallel or perpendicular insertion of the shaft or T-Arm. A pilot hole is predrilled for ease of pinning.
Stacks Image 4799
Straight Shaft
Ground steel for a smooth fit and finished with a black oxide coating to inhibit rust.
Stacks Image 4817
Concrete & Weld Plates
Steel plates designed to be anchored into concrete or welded on to steel frame members to create a flange for quick mounting of the Universal Mounting Block.
Stacks Image 4835
William Kenyon & Sons (Ropes & Narrow Fabrics) Limited
P.O. Box 33
Chapel Field Works
SK14 4RP
United Kingdom

Registered in England No. 600891
Contact us

Tel. +44(0)161 308 6030
Fax: +44(0)161 308 6046
© 2024 - site design by Wray Communications